Sony NWZ-B133FBLU - Manual (Page 23)

NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-13(1)
44 45
NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-13(1)
“Common Settings”
Setting Description
“Set Date-Time” Adjusts the date and time.
To set a numerical value, use the / button.
To move the highlighted slider, use the  button.
“AVLS(Volume Limit)” Sets “AVLS(Volume Limit)” (Automatic Volume Limiter System) on or
off. “AVLS ON” limits the maximum volume to prevent disturbing others
nearby, while still providing a comfortable listening volume level. “AVLS
OFF” is set by default.
“Beep” Sets the beep sound when buttons are pressed to on/off.
To turn on the beep sound, set to “Beep ON.”
To turn off the beep sound, set to “Beep OFF.” “Beep ON” is set by default.
“Power Save Mode” Sets the power save setting.
When set to “Save ON Normal,” the power save screen appears in the
display when no operation is performed for about 15 seconds.
When set to “Save ON Super,” the screen goes blank when no operation is
performed for about 15 seconds. This setting consumes the least battery
power.
When set to “Save OFF,” the icon(s) or letter(s) appears in the display
constantly during playback or FM reception (NWZ-B133F/B135F only).
“Save ON Normal” is set by default.
“LED” Turns the power illuminator on/off.
To turn on the power illuminator, set to “LED ON.”
To turn off the power illuminator, set to “LED OFF.”
“LED ON” is set by default.
Settings (continued)
Setting Description
“Contrast” Adjusts the screen contrast.
To adjust the numerical value, use the / button.
You can adjust the contrast of the screen (+7 to -7).
“USB Bus Powered” Sets the rate of battery charging.
When set to “High-Power 500mA,” the player will be charged at 500
milliampere per second. The player will be charged quickly.
When set to “Low-Power 100mA,” the player will be charged at 100
milliampere per second. Although the player is charged slower, the
stability of data transferring will be improved.
“High-Power 500 mA” is set by default.
“Information”
Information such as the model name, built-in flash memory capacity, and firmware version
can be displayed.
1: model name
2: built-in flash memory capacity
3: version information for the player’s firmware
“Language”
Selects the display language from “English,” “Español,” “Français,” “Português,” “Русский,” “ ,”
“ ,” or “ .”
Settings
Continued 