Operation, Troubleshooting (continued) – Sony NWZ-B133FBLU User Manual

Page 25

Advertising
background image

NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)





NWZ-B133 / B135 / B133F / B135F. GB. 3-877-773-11(1)



If the approaches listed above fail to resolve the issue, consult your

nearest Sony dealer.

Operation

Symptom

Cause/Remedy

There is no sound.

• The volume level is set to zero.

 Turn the volume up ( page 10).

• The headphone jack is not connected properly.

 Connect the headphone jack properly ( page 10).

• The headphone plug is dirty.

 Clean the headphone plug with a soft dry cloth.

• No audio files are stored in the built-in flash memory.

 If “NO DATA” appears, transfer audio file(s) from the

computer.

Songs cannot be played.

• The battery power is consumed.

 Charge the battery fully ( page 15).

 If the player does not react, even after charging the battery,

press the RESET button to reset the player ( page 47).

• File content, such as a subscription, etc., is beyond the

expiration/playback time restriction.

 A file that is beyond its expiration/playback time restriction

cannot be played. Update the file using your software.

Symptom

Cause/Remedy

Noise is generated.

• A device emitting radio signals, such as a mobile phone is being

used near the player.

 When using such devices as mobile phones, keep them away

from the player.

• Audio data is damaged.

 Delete the audio file(s) then transfer again. When

transferring audio files, close any other applications to avoid

file damage.

Buttons do not work.

• The HOLD switch is set to the direction of the arrow ().

 Slide the HOLD switch to the opposite direction of the arrow

() ( page 11).

• The player contains moisture condensation.

 Wait a few hours to let the player dry.

• The remaining battery power is low or insufficient.

 Charge the battery power by connecting to the computer (

page 14).

 If the player does not react, even after charging the battery,

press the RESET button to reset the player ( page 47).

Playback does not stop.

• With the player, there is no difference between stopping and

pausing. When you press the  button,  appears and

playback pauses/stops.

It takes time to start up the player. • It may take time to start up the player if many files or folders are

stored on the player, or if audio data transferred to the player

has a lot of ID3 tag information. Wait until the start-up

animation appears.

Troublesho

oting

Continued 

Troubleshooting (continued)

Advertising
This manual is related to the following products: