Sony DSLR-A700 - Manual (Page 159)

159
T
ro
ubl
e
sho
ot
ing
No lens attached. Shutter is locked.
• [Release w/oLens] is set to [Disable].
Attach a lens. When attaching the
camera to an astronomical telescope or
something similar, set it to [Enable] in
the Custom menu.
Unable to display.
• Images recorded with other cameras or
images modified with a computer may
not be able to be displayed.
No images
• There is no image in the memory card.
Image protected
• You tried to delete protected images.
Release the protection.
Unable to print.
• You tried to mark RAW images with a
DPOF mark.
Initializing USB connection...
• A USB connection has been
established. Do not disconnect the USB
cable.
Check the connected device.
• A PictBridge connection cannot be
established. Disconnect the USB cable
and connect it again.
Camera overheating. Allow it to cool.
• The camera has become hot because
you have been shooting continuously.
Turn the power off. Cool the camera
and wait until the camera is ready to
shoot again.
Camera error
System error
• Turn the power off, remove the battery
pack, then re-insert it. If the message
appears frequently, consult your Sony
dealer or local authorized Sony service
facility.
Cover open
• Close the memory card cover to start
shooting.
• Check that the access lamp is not lit,
then open the cover when you replace
the memory card.
Unable to magnify.
Unable to rotate image.
• Images recorded with other cameras
may not be enlarged or rotated.
No images changed
• You attempted to protect images or
specified DPOF without changing the
specification of those images.
Cannot create more folders.
• The folder with a name beginning with
“999” exists on the memory card. You
cannot create any folders if this is the
case.
Printing canceled
• The print job was canceled. Disconnect
the USB cable or turn the camera off.
Unable to mark.
• You attempted to mark RAW images on
the PictBridge screen.
No printable image
• You attempted to print images from a
folder that has no images when [Folder
print] was selected.