Sony DSLR-A700 - Manual (Page 78)

78
• Before you connect the flash sync cord to the Flash sync terminal, turn off the power of the connected
flash. If the power is on, it may flash when you connect the cord.
• The flash will always be full emission. Flash compensation (page 75) cannot be used. You can perform
bracket shooting while holding down the AEL (AE lock) button (the aperture is adjusted, page 46).
• Using auto white balance is not recommended. Use custom white balance to gain more precise white
balance.
• You can use a flash equipped with a flash sync terminal of the opposite polarity.