Sony DSLR-A700 - Manual (Page 117)

117
Pl
ay
ba
ck m
en
u
For details on the operation 1 page 32
To specify DPOF on all the images
1 Select [All images] in [DPOF setup].
The message “Number of copies?” appears.
2 Select a number of sheets with v/V on the multi-selector, then press the center of the multi-
selector.
The message “Set DPOF?” appears.
3 Select [OK] with v, then press the center of the multi-selector.
The DPOF is specified on all the images, and the screen returns to the playback screen.
• If you insert a memory card that contains DPOF-marked images specified with other cameras into this
camera, then specify images to which to attach a DPOF-mark, the DPOF specifications made with other
cameras are canceled.
To unspecify DPOF on all the images
When you do so, the index print is also canceled. Since the DPOF marks are left on after
printing, it is recommended that you just clear the marks.
1 Select [Cancel all] in [DPOF setup].
The message “Cancel all?” appears.
2 Select [OK] with v on the multi-selector, then press the center of the multi-selector.
The DPOF is unspecified on all the images, and the screen returning to the playback screen.
You can impose the date onto images when printing images. The position of the date (inside or
outside the image, character size, etc.) depends on your printer.
• Normally, only the date is inserted, however, imposed items may be different depending on the printer.
This function may not be provided, depending on the printer.
You can create an index print of all the images in the memory card.
• The number of images to print on a sheet and the format depend on the printer. RAW images do not print
in index print.
• The images you shot after setting the index print are not included in the index print. It is recommended
that you create the index print just before printing it.
Date imprint
On Imposes the date.
Off Does not impose the date.
Index print
Create index Specifies an index print.
Delete index Does not specify an index print.