Alpine MRV-F900 - Manual (Page 23)

19
- EN
Specifications
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20kHz):
Per channel into 4 ohms (0.08% THD): 75Wx4
Per channel into 2 ohms (0.3% THD): 150Wx4
Bridged into 4 ohms (0.3% THD): 300Wx2
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20kHz):
Per channel into 4 ohms (0.08% THD): 100Wx4
Per channel into 2 ohms (0.3% THD): 200Wx4
Bridged into 4 ohms (0.3% THD): 400Wx2
MAX Power:
Stereo: 200Wx4
Bridged: 600Wx2
Frequency Response: 10 Hz to 60 kHz (+0, –1 dB)
Signal-to-Noise Ratio (referenced to rated power): 105 dBA
Input Sensitivity (for rated power output):
500mV to 8.5V (1.0V at center detent)
Input Impedance: 10k ohms<
Speaker Impedance: 4 or 2 ohms (Stereo),
4 ohms (Bridged)
Power Requirement: 11 – 16V DC Negative Ground
Weight: 15 kg (33 lbs. 1 oz)
Dimensions
Width 650 mm (25-19/32")
Height 85.7 mm (3-3/8")
Depth 247 mm (9-47/64")
Parts name Quantity
End Cover ................................ 1
Terminal Cover ........................ 1
Bracket ..................................... 3
Hexagon Wrench ...................... 1 SET
Self-Tapping Screw .................. 4
Machine Screw ......................... 6
Hexagon Screw ........................ 2
Double Face Tape ..................... 1 SET
Cushion .................................... 1 SET
Insulation Tube ......................... 1 SET
Fuse Box ................................. 1
Fuse (80A) ............................... 1
<Components>
Due to continuous product improvement, specifications and design are subject to change
without notice.
The illustrations included in these instructions may appear different from the actual product
due to printing conditions.