Sony MZ-RH1 - Manual (Page 79)

Audio formats supported by this recorder
Recording:
LinearPCM (44.1 kHz/16 bit)
ATRAC3plus (Hi-SP, Hi-LP)
ATRAC3 (LP2, LP4)
ATRAC (SP)
Playback:
LinearPCM
ATRAC3plus
ATRAC3
ATRAC
MP3 (for playback only) (MPEG-1 Audio Layer-3,
sampling frequency 32/44.1/48 kHz, bit rate 32-320
kbps (fixed/variable bit rate))
ATRAC stands for Adaptive TRansform Acoustic
Coding.
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML (Partial
Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
Frequency response (During digital and analog
input)
20 to 20,000 Hz ±3 dB
Input connectors*
MIC (PLUG IN POWER): stereo mini-jack
(minimum input level 0.13 mV)
LINE IN (OPT): stereo mini-jack for analog input
(minimum input level 49 mV)/optical (digital) mini-
jack for optical (digital) input
Output connector
 /LINE OUT: stereo mini-jack (dedicated remote
jack) / regulated output 194 mV (10 k  )
Maximum output (DC)
Headphones:
4.5 mW + 4.5 mW (16
 ) (European model)
5 mW + 5 mW (16  ) (Other models)
Power requirements
Sony AC Power Adaptor DC 5 V AC 100 V - 240 V,
50/60 Hz
Lithium-ion rechargeable battery
LIP-4WM, 3.7 V, 370 mAh, Li-ion
Operating temperature
+5 °C (+41 °F) to +35 °C (+95 °F)
Battery operation time**
See “Battery life” ( page 16)
Dimensions
Approx. 83.8 Ч 84.4 Ч 14.7 mm (w/h/d)
(3
3 /
8
Ч 3 3 /
8
Ч 19 /
32
in.) (excluding projecting parts
and controls)
Mass
Approx. 96 g (3.4 oz.) (the recorder only)
Approx. 106 g (3.8 oz.) (including the rechargeable
battery)
* The LINE IN (OPT) jack is used to connect either
a digital (optical) cable or a line (analog) cable.
** Measured in accordance with JEITA.
US and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
79
Additional Information
MZ-RH1/MZ-M200.GB.2-669-084-11(1)