Sony MZ-RH1 - Manual (Page 20)

Installing SonicStage/MD Simple Burner onto your
computer
Make sure to install the driver for this recorder from the supplied CD-ROM. If SonicStage, Net
MD Simple Burner, or OpenMG Jukebox is already installed, the older version of the software
will be overwritten by the new version. The functions and music data of the older version will be
retained.
1
Close all Windows applications.
The following conditions may prevent a successful installation. Confirm whether they apply or
not when installing the software.
• You did not logon as “Administrator” or “Computer Administrator” (when using Windows
2000/Windows XP)
• Virus-check software is activated. (Such software demands a large amount of system
resources.)
2
Insert the supplied CD-ROM into the CD drive of your computer.
The setup program starts up automatically and the installation window appears.
3
When the [Region Selection] screen appears, select the region where the
SonicStage software will be used, and then click [Next].
When the [Region Selection] screen does not appear, skip this step.
4
Click [Install SonicStage and MD Simple Burner] and then follow the displayed
instructions.
Read the instructions carefully.
The installation may take 20 to 30 minutes,
depending on your system environment.
Make sure to restart your computer only after
the installation is completed.
[Install SonicStage and MD Simple Burner]
20
MZ-RH1/MZ-M200.GB.2-669-084-11(1)