Sony DCR-TRV25 - Manual (Page 155)

155
Viewing Images Using Your Computer
When connecting to a computer using the i.LINK cable (DV
connecting cable)
Your computer must have a DV jack and editing software installed that can read video
signals.
Viewing images recorded on a “Memory Stick”
– Except DCR-TRV16
When connecting to a computer using the USB cable
There are two methods of USB connection, NORMAL and PTP. The default setting is
NORMAL. Here we explain how to use the camcorder with NORMAL USB connection.
See page 157 when using Windows and page 171 when using Macintosh.
You can also use a Memory Stick Reader/Writer (optional).
When connecting to a computer without a USB jack
Use an optional floppy disk adaptor for Memory Stick or a PC card adaptor for Memory
Stick.
When purchasing an accessory, check its catalog beforehand for the recommended
operating environment.
Viewing images with your computer – Introduction
: Signal flow
i.LINK cable (DV connecting cable) (optional)
DV IN/
OUT
USB jack
USB cable (supplied)
Push into the end
(USB) jack
DV jack