Sony DCR-TRV25 - Manual (Page 39)

39
Playback
–
Basics
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander. The indicators appear
on the screen.
To make the indicators disappear, press DISPLAY again.
About date/time and various settings
Use the Remote Commander for this operation.
In addition to images, your camcorder automatically records the recording data,
including date/time and various settings on the tape (data code).
1 Set the POWER switch to VCR, then play back a tape.
2 Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time t various settings (SteadyShot, white balance, gain, shutter speed, aperture
value, exposure mode) t no indicator
[a] Tape counter
[b] SteadyShot OFF
[c] Exposure mode
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
To not display various settings
Set DATA CODE to DATE in the menu settings (p. 184).
The display changes as follows when you press DATA CODE on the Remote
Commander:
date/time y no indicator
Playing back a tape
DISPLAY
DATA CODE DISPLAY
Date/time Various settings
[g]
[b]
[d]
[e]
[f]
[c]
60 AWB
F2.0 9dB
AUTO
JUL 4 2002
12:05:56 PM
50min 0:00:23:01 50min 0:00:23:01
[a]