Sony MHC-M100 - Manual (Page 18)

18
1
Press TUNER/BAND repeatedly until
the band you want appears in the
display.
Every time you press the button, the band
changes as follows:
FM y AM
2
Turn SELECTOR to tune in the desired
preset station.
For MHC-M500AV/M300AV
You can also use TUNING + or – on the
remote to tune in preset stations.
For MHC-M100
You can also use . or > on the remote
to tune in preset stations.
To listen to non-preset radio
stations (front panel only)
Use manual or automatic tuning in step 2. For
manual tuning, press + or – repeatedly. For
automatic tuning, press and hold + or –.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic Source
Selection).
• When an FM program is noisy, press STEREO/
MONO so that “MONO” appears in the display.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
• To improve broadcast reception, reorient the
supplied antennas.
Turn counter-
clockwise for
lower preset
numbers. Turn clockwise
for higher
preset
numbers.
Preset number* Frequency
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
* When only one station is stored, “ONE
PRESET” appears in the display.
To Do this
Turn off the radio Press ?/1.
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/– on the
remote).
Listening to the radio
(continued)