Sony MHC-M100 - Manual (Page 54)

54
General
Power requirements 120 V AC, 60 Hz
Power consumption
U.S.A. models
MHC-M500AV:
210 watts
MHC-M300AV: 190 watts
MHC-M100: 150 watts
Canadian model
MHC-M300AV:
190 watts
Dimensions (w/h/d) Approx. 280
Ч
373
Ч
468 mm
Mass
MHC-M500AV:
Approx. 11.0 kg
MHC-M300AV: Approx. 10.9 kg
MHC-M100: Approx. 10.5 kg
Supplied accessories: AM loop antenna (1)
Remote commander (1)
Batteries (2)
FM lead antenna (1)
Speaker cords (for MHC-
M500AV/M300AV only) (2)
Center speaker pads (for MHC-
M500AV/M300AV only) (4)
Monaural connecting cord (for
MHC-M500AV only) (1)
Design and specifications are subject to change
without notice.
Specifications (continued)
Center Speaker (MHC-M500AV/M300AV only)
SS-CT175D for MHC-M500AV:
Speaker system 1-way, 1-unit, bass-reflex type
magnetically shielded
Speaker units
Full-range:
8 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d) Approx. 280
Ч
110
Ч
146 mm
Mass Approx. 1.3 kg net per speaker
SS-CT175 for MHC-M300AV:
Speaker system 1-way, 1-unit, bass-reflex type
magnetically shielded
Speaker units
Full-range:
8 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d) Approx. 280
Ч
110
Ч
146 mm
Mass Approx. 1.3 kg net per speaker
For customers in Canada
(MHC-M300AV only)
Use only the supplied SS-RS175 rear surround
speaker for connection to the REAR SPEAKER
connector, the supplied SS-CT175 center surround
speaker for connection to the CENTER SPEAKER
connector on the MHC-M300AV.
Super woofer (MHC-M500AV only)
SA-W17
System
Speaker system
Active super woofer, Magnetically
shielded
Speaker unit Woofer: 16 cm cone type
Enclosure type Advanced SAW type
Continuous RMS power output
60 W
(8 ohms, 20 – 150 Hz, 10% THD)
Reproduction frequency range
28 – 200 Hz
High frequency cut-off frequency
200 Hz
Input
LINE IN (input pin jack)
General
Power requirements
120 V AC, 60 Hz
Power consumptions 45 W
Dimensions (w/h/d) Approx. 205
Ч
385
Ч
385 mm,
including front grille
Mass Approx. 10.5 kg