Sony MHC-M100 - Manual (Page 30)

30
Labeling a CD (continued)
7
Press ENTER to complete the labelling
procedure.
The Disc Memo lights up in the display.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
Repeat steps 2 to 7 to label additional discs
or groups.
Note
The Disc Memo stores the number of the slot in
which the CD was inserted. Re-enter the Disc Memo
when inserting a new CD into that slot.
To erase a Disc Memo
1 Follow steps 1 through 3 of “Labeling a CD” on
page 29 to select the Disc Memo you want to
erase.
2 Press CLEAR.
The Disc Memo disappears.
3 Press ENTER.
To erase all Disc Memos of all
discs
When you perform the following operation, the
program created for Program Play is also erased at
the same time.
While holding down INPUT, press ENTER. “ALL
ERASE” appears in the display, and all Disc
Memos and the program will be erased.
Tips
• When you replace a disc with a CD-TEXT disc, the
Disc Memo of the CD-TEXT disc is restored
automatically.
The Disc Memo for the CD-TEXT disc is no longer
stored (disappears) each time the CD is removed.
Note that you cannot change the Disc Memo of a
CD-TEXT disc.
• You can label discs while the front cover is open.
Locating a specific CD
SELECTOR
SCAN SEARCH ENTER FUNCTION
./>
Locating a disc by scanning
each disc title
— Memo Scan
You can locate a disc you want to play quickly by
scanning the Disc Memos (see page 29) in the
display and starting playback.
Note that you cannot use this function in ALL
DISCS Shuffle Play.
1
Press FUNCTION repeatedly until
“CD” appears.
2
Press SCAN.
“MEMO SCAN” appears, and Disc Memos
appear in order.