Sony MHC-M100 - Manual (Page 33)

The Tape Deck
33
Recording a CD by
specifying track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make sure
the playing times for each side do not exceed the
length of one side of the tape.
2
9
3 5 4 8
6 1
CHECK CLEAR
CONTINUE
x
10
1
Insert a blank tape into deck B.
2
Press FUNCTION repeatedly until
“CD” appears in the display.
3
Press PROGRAM.
4
Turn SELECTOR until the desired disc
number or Disc Memo appears.
To program the whole disc, make sure “AL”
is displayed below “TRACK” and skip to
step 6.
5
Press . or > until the desired
track number appears.
When the disc you select has Disc Memo, it
appears and then switches to the following
display.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
Track number
6
Press ENTER to program the track.
The programmed track and corresponding
step (playing order) appear in the display.
Programmed track
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
Programmed disc Playing order
continued