Sony MHC-M100 - Manual (Page 36)

36
Flashing part of a CD
— Flash
With the Flash function, you can “flash” the CD
sound during play. This lets you create original
recordings.
For MHC-M500AV/M300AV
LOOP
FLASH
For MHC-M100
LOOP
FLASH
, Press and hold FLASH on the remote
during play at the point you want to
start the Flash function, and release it to
resume Normal Play.
To adjust the flash length
Press M or m while holding FLASH to select
different flash lengths (FLASH 1 – 20).
To use LOOP and FLASH
together
Press and hold both LOOP and FLASH at the
same time.
Note
The loop and flash length cannot be adjusted together.
Adjust the loop and flash lengths independently
beforehand if necessary.