Other functions, Changing the sound settings, Adjusting the sound characteristics - bal/fad/sub – Sony CDX-HS70MW User Manual

Page 12: Customizing the equalizer curve - eq3, Adjusting setup items - set, Adjusting the sound characteristics, Bal/fad/sub customizing the equalizer curve, Adjusting setup items — set, Other functions changing the sound settings, Adjusting the sound characteristics — bal/fad/sub

Advertising
background image

12

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer
volume.

1

Press (SELECT) repeatedly until
“BAL,” “FAD” or “SUB” appears.
The item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right)

t FAD (front-rear) t

SUB (subwoofer volume)*

2

t AUX*

3

*1 When EQ3 is activated (page 12).
*2 When the audio output is set to “SUB”

(page 12).

“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.

*3 When AUX source is activated (page 15).

2

Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

With the card remote commander
In step 2, to adjust the selected item, press

<, M, ,

or

m.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your
own equalizer settings.

1

Select a source, then press (EQ3)
repeatedly to select “CUSTOM.”

2

Press (SELECT) repeatedly until
“LOW,” “MID” or “HI” appears.

3

Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (SELECT) before the setting
is complete.

After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Tip
Other equalizer types are also adjustable.

With the card remote commander
In step 3, to adjust the selected item, press

<, M, ,

or

m.

Adjusting setup items — SET

1

Press and hold (SELECT).
The setup display appears.

2

Press (SELECT) repeatedly until the
desired item appears.

3

Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).

4

Press and hold (SELECT).
The setup is complete and the display returns
to normal play/reception mode.

Note
Displayed items will differ, depending on the source
and setting.

With the card remote commander
In step 3, to select the setting, press

< or ,.

The following items can be set (follow the page
reference for details):

z

” indicates the default settings.

CLOCK-ADJ (Clock Adjust) (page 5)

CT*

1

(Clock Time)

To set “CT-ON” or “CT-OFF” (

z

) (page 10, 11).

BEEP

To set “BEEP-ON” (

z

) or “BEEP-OFF.”

AUX-A*

2

(AUX Audio)

To turn the AUX source display “AUX-A-ON”
(

z

) or “AUX-A-OFF” (page 15).

A.OFF (Auto Off)

To shut off automatically after a desired time
when the unit is turned off: “A.OFF-NO” (

z

),

“A.OFF-30S (Seconds),” “A.OFF-30M
(Minutes)” or “A.OFF-60M (Minutes).”

REAR/SUB*

2

To switch the audio output.
– “REAR-OUT” (

z

): to output to a power

amplifier.

– “SUB-OUT”: to output to a subwoofer.

DEMO*

2

(Demonstration)

To set “DEMO-ON” (

z

) or “DEMO-OFF.”

Advertising
This manual is related to the following products: