Sony XAV-63 - Manual (Page 31)

31
Handsfree Calling and Audio Streaming
— Bluetooth function (XAV-64BT only)
Before using the Bluetooth
function
Bluetooth functions and descriptions apply only
to XAV-64BT.
Basic procedure of the Bluetooth
function
1 Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called “pairing.” This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time.
Note
If you delete the device registration from this unit
by initializing, you need to perform pairing again.
2 Connecting
After pairing is made, connect this unit and
the Bluetooth device. Depending on the
device, connection is automatically made
along with the pairing.
3 Handsfree calling/audio streaming
You can make/receive a handsfree call, or
listen to audio through this unit.
For details on the compatibility of your device,
visit the support site on the back cover.
Bluetooth status indications
None: Bluetooth signal is off.
Lit: Bluetooth signal is on.
None: No device is connected for
audio streaming.
Flashing: Connection is in progress.
Lit: A device is connected.
None: No cellular phone is connected
for handsfree calling.
Flashing: Connection is in progress.
Lit: A cellular phone is connected.
Indicates the signal strength status of
the connected cellular phone.
Indicates the remaining battery status
of the connected cellular phone.
None: No unread SMS messages
Lit: Unread SMS message(s)
ATT
Calling...
Calling...
Name
0123456789
Bluetooth status indications