Sony ILCE-3000 - Manual (Page 129)

129 GB
Ta
ble
of
co
nt
e
n
ts
Sa
mp
le
pho
to
Me
nu
In
dex
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an
A-mount lens with the LA-EA2 Mount Adaptor (sold separately).
1 MENU t [Setup] t [AF Micro Adj.].
2 [AF Adjustment Setting] t [On].
3 [amount] t desired value t OK.
• It is recommended that you adjust the position under actual shooting conditions.
• When you attach a lens for which you have already registered a value, the registered value appears on the
screen. [±0] appears for lenses for which a value has not yet been registered.
• If [–] is displayed as the value, then a total of 30 lenses have been registered and no new lens can be
registered. To register a new lens, attach a lens for which the registration can be erased, and set its value
to [±0], or reset the values of all the lenses using [Clear].
• Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.]
with other brands of lenses, the registered value may be affected. Do not perform [AF Micro Adj.] with
an unsupported lens.
• You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konika-Minolta lens of the same
specification.
AF Adjustment
Setting Sets whether or not to use the [AF Micro Adj.] function. Select [On] to
use the [AF Micro Adj.].
amount Allows you to select an optimum value between –20 and +20.
Selecting a larger value shifts the autofocused position away from the
camera. Selecting a smaller value shifts the autofocused position
closer to the camera.
Clear Clears the value you set.
Notes