Sony NEX-VG30H - Manual (Page 82)


Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Camera Data
 White Balance
 SteadyShot off
 Shutter Speed
 IRIS (Aperture value)
 Gain
 Brightness
 Flash
 Exposure compensation
 White Balance (B-A, G-M)
 ISO
 White Balance (Color Temp.)
Tips
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Wireless Remote Commander: [Date/Time] 
[Camera Data]  [Off] (no indication).
Depending on the memory card condition, bars
[--:--:--] appear.
Volume
You can adjust the volume of playback
sound by touching / .
TV Type
You need to convert the signal depending
on the TV connected when playing back
movies and photos. The recorded movies




and photos are played back as following
illustrations.
 16:9
Select this to view your movies on a 16:9
(wide) TV. The recorded movies and photos
are played back as shown below.
Movies and photos
recorded in 16:9
(wide) mode
Movies and photos
recorded in 4:3 mode
4:3
Select this to view your movies and photos on
a 4:3 standard TV. The recorded movies and
photos are played back as shown below.
Movies and photos
recorded in 16:9
(wide) mode
Movies and photos
recorded in 4:3 mode
Notes
Horizontal to vertical ratio of high definition
image quality (HD) movies is 16:9.
When you connect your camcorder to a TV
compatible with the ID-1/ID-2 system, set [TV
Type] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied with your TV (NEX-VG30/
VG30H only) .
Component Output
Select [Component] when connecting your
camcorder to a TV with the component
input jack.
1080p/480i (NEX-VG30/VG30H)
1080p/576i (NEX-VG30E/VG30EH)
Select this when connecting your
camcorder to a TV that has the component
input jack and is capable of displaying the
1080p signal.



Movie
Photo