Alpine CDE-9872RE - Manual (Page 10)

8
-EN
CDE-9874 Series
CDE-9872 Series
Setting RDS Reception Mode and
Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press FUNC./SETUP so that the indicator
lights up.
2
Press 1 /AF to activate the RDS mode.
3
Press or to tune in the desired RDS
station.
4
Press 1 /AF again to deactivate the RDS mode.
5
Press FUNC./SETUP to activate the normal mode.
The indicator goes out.
• Operate the unit while the indicator lights up. If no operation is
performed for 10 seconds, the indicator goes out.
The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
EON Enhanced Other Networks
Recalling Preset RDS Stations
1
Press FUNC./SETUP so that the indicator
lights up.
2
Press 1 /AF to activate the RDS mode.
3
Press FUNC./SETUP to activate the normal mode.
The indicator goes out.
4
Make sure that the indicator light goes out, then
press the preset button in which your desired RDS
station is preset.
If the preset station’s signal is weak, the unit automatically
searches and tunes to a stronger station in the AF
(Alternative Frequencies) list.
5
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to “PI SEEK Setting”
on page 9), the unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the area, the unit
displays the frequency of the preset station and the preset
number disappears.
If the signal level of the Regional (Local) station being tuned
becomes too weak to receive, press the same preset button
to tune in a Regional station in other district.
• For presetting the RDS stations, refer to the Radio Operation section.
The RDS stations can be preset in the F1, F2 and F3 bands only.
• Operate the unit while the indicator lights up. If no operation is
performed for 10 seconds, the indicator goes out.
Receiving RDS Regional (Local)
Stations
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select the
REGIONAL mode, and then press / /ENT.
3
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select ON
or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
4
Press and hold FUNC./SETUP for at least
2 seconds to return to normal mode.
• Press /SOUND (CDE-9874 Series only) or /AUDIO
(CDE-9872 Series only) to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
RDS
VIEW
BAND/TA / /ENT
Rotary encoder
/SOUND 1 /AF
FUNC./SETUP
BAND/TA / /ENT
VIEW 1 /AF
FUNC./SETUP /AUDIO