Alpine CDE-9872RE - Manual (Page 29)

27
-EN
Removal
1. Remove the detachable front panel.
2. Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Front Frame
This unit
Screw (M5 × 8)
(Included)
Mounting Bracket