Sony PEG-TH55 - Manual (Page 147)

147
Performing the IR HotSync
®
operation
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Performing the IR HotSync
®
operation
You can perform the IR HotSync
®
operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup.
1
Tap (Home).
Tap [Applica…] when using CLIE Organizer .
2
Tap (HotSync).
The HotSync screen is displayed.
3
Tap [Local].
4
Tap V , and select [IR to a PC/Handheld].
5
Point the IR port of your CLIÉ handheld directly to the IR port
of the computer.
For best results, your computer and your CLIÉ handheld should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and the computer must be clear of obstacles.
6
Tap (HotSync).
The HotSync
®
operation starts.
A message will be displayed when the HotSync
®
operation is complete.
To restore the local HotSync settings
When performing the local HotSync
®
operation, restore the local HotSync
settings with a USB cable.
1
Connect your CLIÉ handheld to your computer with a USB
cable.
2
Click (HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window, and select
[Local USB] from the menu.