Sony PEG-TH55 - Manual (Page 188)

Beaming 188
Beaming between your CLIÉ handheld and another Palm OS
®
PDA
Receiving beamed information
1
Turn on your CLIÉ handheld and point the IR port of your
CLIÉ handheld directly to the IR port of another Palm OS
PDA device.
The Beam screen is displayed and beaming of data or applications starts.
2
Select the category where you want to save the received
data or applications.
Data or applications received by beaming are saved in the Unfiled
category.
You can also create a new category to save the data or applications, or save
it in the
Unfiled category.
3
Tap [Yes].
The data or applications are saved.
Note
When [Beam Receive:] in the Preferences screen for [General] is set to [ Off] , you
cannot receive data or applications using the beaming feature. Prior to beaming data or
applications, set [Beam Receive:] to [
On] .