Sony KDL-70X830B - Manual (Page 159)

select the wireless band for the Wi-Fi Direct function. When the standby
screen for the Wi-Fi Direct setting is displayed, press the OPTIONS
button, then select [Band Setting].
[Auto]: Normally use this option. It automatically selects an appropriate
band for the Wi-Fi Direct function.
[Auto (2.4GHz Band)]: Use this option when connecting with devices
that support 2.4GHz only. This option may support more devices than
other options.
[Auto (5GHz Band)]: Use this option when connecting with devices that
support 5GHz. This option may improve video streaming quality.
Note that when you select this option, the TV cannot connect with
devices that support 2.4GHz only.
[Select a Channel]: Use this option to select a specific wireless channel.
Tips
For information about the supported wireless band of your device, refer
to the instruction manual of your device.
The 5GHz band may not be supported depending on your
region/country. If the 5GHz band is not supported, you can only use
[Auto] and [Select a Channel].
Notes
If the TV is connected with a wireless router (or access point) at 5GHz:
- The 5GHz connection will be disconnected when [Wi-Fi Direct] is set to
[On]. While the connection is disconnected, communication via the
Internet (such as an incoming call) is stopped.
- The connection will be resumed when [Wi-Fi Direct] is set to [Off].
The 5GHz band may not be supported depending on your region/country.
If the 5GHz band is not supported, the TV can only connect to a wireless
router (access point) using the 2.4GHz band.
List of Contents © 2014 Sony Corporation
Top of Page
153