Sony KDL-70X830B - Manual (Page 224)

press the touchpad again to go to “Watching in 3D” for details.)
Wireless devices or microwave ovens may affect the communication
between the 3D Glasses and the TV as the TV uses the 2.4GHz band. In
this case, try to register again.
If a device that is not 3D-compatible (such as a home theater system) is
connected between the TV and a 3D-compatible device, the TV will not
display 3D pictures. Connect the 3D-compatible device directly to the TV
via an authorized HIGH SPEED HDMI cable bearing the HDMI logo.
Black bars appear on both sides of the screen when
watching 3D pictures.
Black bars appear on both sides of the screen in order to process 3D
signals for the simulated 3D display mode or when adjusting the depth of
3D pictures in [3D Depth Adjustment].
3D display automatically switches on when 3D signal
is detected.
Set to manually turn the 3D display on or off. Press the HOME button,
then select
[Settings] → [Picture & Display] → [3D Settings] → [Auto
3D] → [Off].
The message [3D signal has been detected]
automatically appears when 3D signal is detected.
Deactivate the [3D Signal Notification] setting. Press the HOME button,
then select
[Settings] → [Picture & Display] → [3D Settings] → [3D
Signal Notification] → [Off].
You cannot turn the Active 3D Glasses on.
Replace the battery. (Applies only to TDG-BT400A/BT500A.)
For details on how to replace the battery, press the button to jump to the
title list. Then, press the button again to go to “Watching in 3D.”
(When using the Touchpad Remote Control, press the touchpad. Then,
press the touchpad again to go to “Watching in 3D” for details.)
The LED indicator on the Active 3D Glasses blinks.
Lights up for 3 seconds: Indicates when turning on the glasses.
218