ATEN ALTUSCN KH1516I - Manual (Page 114)

KH1508i / KH1516i User Manual
102
The Main Page
This page lists all of the KH1508i / KH1516i's ports and governs port access.
Selecting a port and double clicking it switches you to the device on that port.
Note: The administrator selects which ports are accessible to each user with
the User Management function (see page 65 for details).
Š The OSD uses a tree view. To see the ports for a particular station, click
the plus sign [ + ] in front of the Station Number. To dismiss the list, click
the minus sign[ – ] in front of the Station Number.
Š A port icon in the shape of a monitor displays in front of the port number.
Ports that have devices connected to them that are up and running have the
port icon lit in green.
Š Ports that have been selected as Quick View ports (see below), have a red
eye icon displayed with the monitor in the port icon column to indicate so.
Š There are two buttons on the title bar at the top right:
The administrator can also use this page to enable/disable Quick View status
for selected ports, and to create, modify, or delete names for each of the ports.
Quick View Ports
Selecting certain ports as Quick View ports is a way of limiting which ports are
included when the KH1508i / KH1516i is in auto scan mode. If the KH1508i /
KH1516i is configured to only auto scan ports that have Quick View status (see
Scan Select, page 84), designating a port as a Quick View port in this dialog
box means that it will be included when auto scanning is in effect.
The spacebar toggles a port's Quick View status. To select/deselect a port,
highlight it and press the spacebar. When a port has been selected as a Quick
View port, a red eye icon displays with the monitor icon in the port icon
column. When a port isn't selected, there is no red eye icon in the column.
Button Function
Log out: clicking this button (or pressing F8) closes the OSD
display and logs you out of the KH1508i / KH1516i session.
Close: clicking this button (or pressing [Esc]) closes the OSD
display but does not log you out of the session. You can bring the
display back with the OSD hotkeys (see OSD Hotkey, page 84).