ATEN ALTUSCN KH1516I - Manual (Page 96)

KH1508i / KH1516i User Manual
84
(Continued from previous page.)
Setting Function
OSD Hotkey Selects which Hotkey controls the OSD function: [Scroll Lock] [Scroll
Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may conflict with
programs running on the computers, the default is the Scroll Lock
combination.
ID Display Selects how the Port ID is displayed: the Port Number alone (PORT
NUMBER); the Port Name alone (PORT NAME); or the Port Number
plus the Port Name (PORT NUMBER + PORT NAME). The default is
PORT NUMBER + PORT NAME.
ID Duration Determines how long a Port ID displays on the monitor after a port
change has taken place. You can choose an amount from 0 - 255
seconds. The default is 5 Seconds.
Check the Always On box to constantly show the ID display.
Scan Select Selects which computers will be accessed under Auto Scan Mode (see
Auto Scanning, page 112). Choices are: ALL - All the Ports which
have been set Accessible (see Port Access, page 67); POWERED ON
- Only those Ports which have been set Accessible and are Powered
On; QUICK VIEW - Only those Ports which have been set Accessible
and have been selected as Quick View Ports (see SET QUICK VIEW
PORTS, page 28,); QUICK VIEW + POWERED ON - Only those Ports
which have been set Accessible and have been selected as Quick
View Ports and are Powered On. The default is ALL.
Scan Duration Determines how long the focus dwells on each port as it cycles
through the selected ports in Auto Scan Mode (see Auto Scanning,
page 112). Key in a value from 0 - 255 seconds. The default is 10
seconds; a setting of 0 disables the Scan function.
Screen
Blanker If there is no input from the console for the amount of time set with this
function, the screen is blanked. Key in a value from 0–30 minutes. A
setting of 0 disables this function. The default is 0 (disabled).
Logout
Timeout If there is no Operator input for the amount of time set with this
function, the Operator is automatically logged out. A login is necessary
before the KH1508i / KH1516i can be accessed again. Enter a value
from 0–180 minutes. The default is 30 minutes. 0 disables the function.
Beeper When set to ON, the beeper sounds whenever the port is switched,
when activating the Auto Scan function (see Auto Scanning,
page 112), or when an invalid entry is made on an OSD menu. The
default is ON.
Change
Password Allows a user to change the account password. After clicking the
Change Password button, a dialog box appears. Enter the old
password. Then, enter a new password and confirm it by entering it
again. Press OK to save changes, or press Cancel to discard changes.