ATEN ALTUSCN KH1516I - Manual (Page 124)

KH1508i / KH1516i User Manual
112
Keyboard Hotkey Operation
Keyboard hotkey combinations allow you to provide KVM focus to a port
directly from the keyboard. The KH1508i / KH1516i provides the following
hotkey features:
Š Auto Scanning
Š Skip Mode Switching
The hotkeys are: A and P for Auto Scanning; and the Arrow Keys for Skip
Mode.
Note: 1. In order for hotkey operations to take place, the OSD Toolbar must be
visible (see , page 101). To use the keys designated as hotkeys (i.e. A,
P, etc.) for normal, non-hotkey purposes, you must first close the
toolbar.
2. For issues affecting multiple user operation in Auto Scan Mode, see
Multiuser Operation, page 111.
Auto Scanning
The Auto Scan function automatically switches among all the ports that are
accessible to the currently logged on user at regular intervals, so that the user
can monitor their activity automatically. (See Scan Select, page 84, for
information regarding accessible ports.)
Setting the Scan Interval
The amount of time Auto Scan dwells on each port is set with the Scan
Duration setting (see page 84).
Invoking Auto Scan
To start Auto Scanning, tap the A key. The Auto Scan function cycles through
the ports in order - starting from the first port on the installation. An S appears
in front of the Port ID Display to indicate that the port is being accessed under
Auto Scan Mode.