ATEN ALTUSCN KH1516I - Manual (Page 123)

Chapter 7. The User Interface
111
Multiuser Operation
The KH1508i / KH1516i supports multiuser operation. Up to 32 users can log
in at the same time. When multiple users simultaneously access the KH1508i /
KH1516i switch from remote consoles, the rules of precedence that apply are
shown in the following table:
Note: We recommend that the user who starts Panel Array Mode set it to
display at least four panels; otherwise, it is possible that other users may
receive only part of the picture.
Operation Rule
General Š
Once a user invokes the OSD, no other user can invoke it
until the original user closes it.
Auto Scan Mode Š
If a user has invoked Auto Scan Mode (see Auto Scanning,
page 112), but the OSD has not been invoked, another user
can interrupt Auto Scan Mode by invoking the OSD.
Panel Array Mode Š
When a user has invoked Panel Array Mode (see page 109),
all successive users automatically enter Panel Array Mode.
Panel Array Mode continues until the original user stops it.
(Administrators can override Panel Array Mode.)
Š
Only the user who starts Panel Array Mode can use the Skip
Mode (see page 113) function.
Š
Only the user who starts Panel Array Mode and users with
administrator priveleges can switch ports. Other users
automatically switch to the ports that the original user
selects.
Note: If a user does not have access rights to the port that
the original user switches to, that user will not be able to
view the port.
Š
Individual users can increase or decrease the number of
panels they wish to view in Panel Array Mode; however, the
picture quality may decrease as the number of panels
decreases.