Sony VRD-MC3 - Manual (Page 44)

44
5
Operate the camera or video device to start playback of video.
The following appears in the DVDirect’s display window.
Hint
The DVDirect detects and selects video input signals automatically when you play back
video from the connected video device. You can view the video playback in the display
window with the selected input source displayed in the top left.
DV , DVD : DV IN is detected.
Video , DVD : VIDEO IN is detected.
S-Video , DVD : S VIDEO IN is detected.
If the correct input source is not selected (or if the video playback does not display), press
M or m to select the correct input manually.
6
Press the (Record) button to start recording.
Dubbing from the camera or video device starts. During recording,
[Recording] appears in the display window as the video is played back.
Note
If you stop playback on the camera or video device during recording (or the video signal
is interrupted), the DVDirect pauses recording and the
(Record) button flashes
slowly. To resume recording, restart playback on the video device. If no video signal is
detected for 2 minutes, recording stops.
REC quality
Remaining time
Recording time