Sony DVP-S560D - Manual (Page 65)

65
Additional Information
Specifications
CD/DVD player
Laser Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (AUDIO OUT connectors
only)
Harmonic distortion
Less than 0.003 %
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001 % W PEAK)
Outputs
AUDIO OUT
(1, 2)
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)
VIDEO OUT
(1, 2)
S VIDEO OUT
(1, 2)
5.1CH
OUTPUT
COMPONENT
VIDEO OUT
(Y, P
B /B-Y,
P R /R-Y)
PHONES
General
Power requirements
DVP-S560D
120 V AC, 60 Hz
DVP-S565D
110 – 240 V AC, 50/60 Hz
Power consumption
16 W
Dimensions (approx.)
430
Ч
69
Ч
260 mm (17
Ч
2 3 / 4
Ч
10 1 / 4 in.)
(w/h/d) incl. projecting parts
Mass (approx.)
2.9 kg (6 lb 6 oz)
Operating temperature
5 ˚C to 35 ˚C (41 ˚F to 95 ˚F)
Operating humidity
25 % to 80 %
Supplied accessories
See page 7.
Design and specifications are subject to change without notice.
E NERGY S TAR R is a U.S. registered mark.
As an E NERGY S TAR R Partner, Sony Corporation has
determined that this product meets the E NERGY S TAR R
guidelines for energy efficiency.
Jack
type
Phono
jacks
Optical
output
connector
Phono
jack
Phono
jacks
4-pin
mini DIN
Phono
jack
Phono
jacks
Phone
jack
Output
level
2 Vrms
(at 50 kilohms)
–18 dBm
0.5 Vp-p
1.0 Vp-p
Y: 1.0 Vp-p
C: 0.286 Vp-p
2 Vrms
(at 50 kilohms)
Y: 1.0 Vp-p
P B /B-Y,
P R /R-Y:
0.7 Vp-p
12 mW
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
Over 10 kilohms
75 ohms,
sync negative
75 ohms
32 ohms