Avaya 4075 - Manual (Page 62)

Call features
62
Rejecting a call
To reject an incoming call, perform the following step:
Change settings during a call
During a call, you can adjust the headset or loudspeaker volume or mute
the handset.
This section describes the following tasks:
• “Adjusting the headset or loudspeaker volume” (page 62)
• “Using mute during a call” (page 63)
Adjusting the headset or loudspeaker volume
During a call, you can change the headset or loudspeaker volume using
the volume keys. A bar in the display increases or decreases to indicate
the volume setting. A beep sounds at the minimum or maximum volume.
1. Press the Reject soft key during a call alert.
The call diverts to your voice mail system or
another number if call forward feature is configured.
Contact your system administrator to determine if
you can use this feature.
Attention: If you reject or do not answer a call, or if the call is blocked
by Caller Filter (4070 and 4075 only), the message Number
of missed calls: N Show?
appears on the display, where N
is the number of calls that have been blocked, missed, or
rejected.
Press the
Yes soft key to open the Missed calls list or press
the No soft key to close the dialogue. For more information,
see “Missed calls list” (page 86) .
Reject