Sony MZ-N510CK - Manual (Page 46)

46
Notes
• You can create a maximum of 99 groups on a
disc. It will not be possible to make a group
setting if the tracks, groups and disc name on
a disc exceed the maximum number that can
be input.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
consecutive before you can assign them
(“Moving recorded tracks (Move)”, page 38).
1
While the recorder is stopped, press
MENU.
2
Press . or > until “EDIT”
appears in the display, and then press
ENTER.
3
Press . or > until “G : Set”
appears in the display, and then press
ENTER.
The track number of the first track
(“STR”) appears in the display.
4
Press . or > until the number
of the desired first track appears in the
display, and then press ENTER.
This selects the first track of the new
group.
5
Press . or > until the number
of the desired last track appears in the
display, and then press ENTER.
This selects the last track of the new
group.
6
Label a group (see “Labeling
recorded groups” (page 47)).
To return the preceding
settings
Press x.
To cancel the operation
Press MENU.
Notes
• In step 4, the first track must be either the first
track of an existing group or a track that does
not belong to a group.
• When selecting the last track in step 5, make
sure the track comes after the one selected in
step 4. The last track must be either the last
track of an existing group or a track that does
not belong to a group.
Releasing a group setting
1
Select a group you want to release
and check the contents (see “Playing
a track in group play” (page 44)).
2
Press x.
3
Press MENU.
MENU
4-way control key
(ENTER • N, ., >, x)
STR:01
MENU
4-way control key
(., >, x)