Sony CHC-CL1 - Manual (Page 29)

Additional Information
29
Specifications
Main Unit (HCD-CL3/CL1)
Amplifier section
For the U.S. model (HCD-CL1)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from 120 –
10,000 Hz; rated 50 watts per channel minimum RMS
power, with no more than 10% total harmonic
distortion from 250 milli watts to rated output.
Total harmonic distortion: less than 0.1% (6 ohms at
1 kHz, 25 W)
European models
HCD-CL3:
DIN power output (Rated): 80 + 80 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference):
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
Music power output (Reference):
180 + 180 watts
(6 ohms at 1 kHz, 10%
THD)
HCD-CL1:
DIN power output (Rated): 40 + 40 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference):
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
Music power output (Reference):
95 + 95 watts
(6 ohms at 1 kHz, 10%
THD)
continued
Messages
One of the following messages may appear or
flash in the display during operation.
CD
Cannot Edit
You tried to label a CD TEXT disc.
Name Full
There are already 50 disc titles stored in the
system.
No Disc
There is no CD in any of CD 1 – 3.
OVER
You have reached the end of the CD while
pressing M during play or pause.
Push STOP!
You pressed PLAY MODE/DIRECTION during
play.
Step Full!
You tried to program 26 or more tracks (steps).
TAPE
No Tab
You cannot record the tape because the tab has
been removed from the cassette.
No Tape
There is no tape in the tape deck.
Open
You performed a tape operation with the tape deck
lid not completely shut.