Inserting two size aa (r6) batteries into, The remote, Setting up your speakers for dolby pro – Sony MHC-MG310AV User Manual

Page 9: Logic, Set up the am loop antenna, then connect it, See page 28 for details

Advertising
background image

Getting Started

9

Jack type B

AM

FM 7

5

Jack type A

AM

FM

75

5

Connect the FM/AM antennas.

Set up the AM loop antenna, then connect
it.

Extend the FM antenna
horizontally

To connect optional components

See page 28 for details.

Notes

• Keep the speaker cords away from the antennas to

prevent noise.

• Do not place the rear surround speakers on top of a

TV. This may cause distortion of the colors in the
TV screen.

• Be sure to connect both left and right rear surround

speakers. Otherwise, the sound will not be heard.

• The type of speakers supplied vary according to the

model you purchased (see “Specifications” on
page 35).

• The MHC-MG110 speaker system is not

magnetically shielded. Therefore, leave a space of 5
to 10 cm or more when placing the front speakers
next to a television.

Inserting two size AA (R6)
batteries into the remote

E

e

e

E

Tip

With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.

AM loop antenna

AM loop antenna

6

Connect the power cord to a wall outlet.

The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.

Note on placement

Be sure to place this unit on a horizontal place.
If the unit is slanted, it may cause malfunction
or damage to the system.

Extend the FM antenna
horizontally

Advertising
This manual is related to the following products: