Sony MHC-MG310AV - Manual (Page 19)

Tuner
19
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 18).
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press – . or > + (or . or >
on the remote) repeatedly to tune in the
desired preset station.
Preset number Frequency
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press m or M
repeatedly. For automatic tuning, press and
hold m or M.
Tips
• When an FM stereo program has static noise, press
STEREO/MONO repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
• To improve broadcast reception, adjust the supplied
antennas or connect a commercially available
external antenna.
Labeling the preset
stations
— Station Name
You can label each preset station with up to
12 characters (Station Name).
You can also label preset stations using an
optional keyboard (see “Labeling titles through
the keyboard” on page 27).
1
Tune the desired station you want to
label (see “Listening to the radio” on
this page).
2
Follow the same procedures as from
steps 3 to 9 of “Labeling a CD” on
page 16.
To check the preset number and
frequency
The station name appears when you tuned the
labeled station.
To check the preset number and frequency,
press DISPLAY. The preset number and
frequency are displayed for 4 seconds and it
returns to the station name display.
To erase the name
1 Tune the station.
2 Press MENU.
3
Press . or > repeatedly to select
“NAME IN”, then press ENTER.
4 Press CLEAR repeatedly to erase the
name.
5 Press ENTER.