Sony WEGA KV-27FS13 User Manual
Page 37
Using the Menus
25
MTS
Multi-Channel
sound
Stereo:
Select when viewing a broadcast in stereo.
Mono:
Select to reduce noise in areas of poor reception.
Auto-SAP:
Select to have the TV automatically switch to a
Second Audio Program (SAP) when a signal is received.
Speaker
Custom selection
of audio output
source
ON:
Select to listen to the sound from the TV speakers with
or without a separate stereo system.
OFF:
Select to turn off the TV speakers and listen to the
TV’s sound only through external audio system speakers.
Audio Out
Use to control the
TV’s volume
through a stereo
Use Audio Out only when you have an external audio
system connected to your TV.
Variable:
Adjust the volume through your TV.
Fixed:
Adjust the TV volume through a connected stereo.
If your TV is set to Auto-SAP, some programs may be muted or distorted. If
your TV does not output sound, change your Audio settings to Stereo or
Mono.
Press
for direct MTS settings (Stereo, Mono, Auto-SAP).
Audio Out can only be set when Speaker is set to OFF.