Sony WEGA KV-27FS13 - Manual (Page 39)

Using the Menus
27
Channel Fix 2-6: Select when you want to control all channel selection
through a cable box or VCR. Select the appropriate channel
(usually 3 or 4) and use the cable box’s or VCR’s remote
control for channel selection.
Video 1:
Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
AUX 2-6:
Use this setting instead of the 2-6 if you want to
change channels using a cable box, VCR or satellite
receiver and you’ve connected it to the AUX input.
Auto Program Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
any receivable channels.
Channel
Skip/Add Use this feature after you run Auto Program to skip
unwanted channels or add new ones.
1
Use the buttons or the [CH+/-] buttons to select
the channel.
2 Press to Skip or Add (only one option will be
available).
Channel
Label
Label up to 40
channels with
their call letters With the Channel Label window open:
1
Press , then press F or until you reach the desired
channel number.
2 Press to activate the channel.
3 Press then press to highlight the label field.
4 Press F or to display the first call letter or number of
the caption and press
to select it. When finished,
press to activate.
0 9
F
F
F


Favorite Channel, Channel Skip/Add, and Channel Label cannot be used
when Channel Fix is set.