Sony PCG-GRX700 - Manual (Page 155)

Confirming added memory capacity
After you've installed a new memory module, make sure the operating system recognizes it.
To check your system's memory
1. Turn on the computer.
2. Click Start on the Windows ® taskbar, point to All Programs, and then point to Sony Notebook Setup.
3. Select Sony Notebook Setup from the submenu. The Sony Notebook Setup dialog box appears.
4. On the About This Computer tab, make sure the System Memory displayed in the System Information box
matches the amount of memory installed.
The displayed memory may be less than the installed memory due to the amount used by the display adapter.
Sony Notebook Setup Dialog Box
To check your system's memory
1. Turn on the computer.
2. From the Windows ® taskbar, click Start, Control Panel, Performance and Maintenance, and System. The
System Properties dialog box appears.
3. Make sure the General tab is selected. Your system's memory information is listed on the General tab.
Page 155