Sony FWD-32LX1R - Manual (Page 15)

15
(GB)
Connections
1
2
3
1
2
Using the cable holders
You can bundle the cables with the supplied cable
holders (
×6 for the FWD-40LX1 and ×4 for the FWD-
32LX1R). Choose three successive blank parts of the
air vents for the cable holder on the FWD-40LX1.
Rear
Press the hinge part to
open the hooking nails.
Cable management
The display has the cable covers on its back. Before
connecting the cables to the display, pull the cable
covers to open. After connecting the cables to the
display, close the cable covers.
Cable cover (bottom)
Cable cover
FWD-32LX1R
Cable holder
Speaker cord holder
(Only for the FWD-
40LX1)
Inset the cable holder into
the hole on the unit and
rotate it about 90 degrees.
FWD-40LX1
Cable holder
Insert the cable holder
into the slits.
Choose six out of eight holes on the FWD-32LX1R.
Attach the cable holders in the illustration below.
When you connect the speakers SS-SP40FW (not
supplied), route the speaker cords through the speaker
cord holders on the rear of the display unit. (Only for
the FWD-40LX1)