Sony DCR-TRV130 - Manual (Page 28)

28
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder.
The indicators appear on the LCD screen.
To make the indicators disappear, press DISPLAY again.
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Press DATA CODE on the Remote Commander in the playback mode
The display changes as follows:
date/time t various settings (SteadyShot, exposure AUTO/MANUAL, white balance,
gain, shutter speed, aperture value) t no indicator
Not to display recording date
Set DATA CODE to DATE in the menu settings (p. 82).
The display changes as follows:
date/time t no indicator
DISPLAY
Playing back a tape
JUL 4 2001
12:05:56 AM
0:00:23:01 40 min
60 AWB
F1.4 9dB
AUTO
0:00:23:01 40 min
[a]
[b]
[c]
[d]
[e]
[f]
Date/time Various settings
[a] : SteadyShot OFF indicator
[b] : Exposure mode indicator
[c] : White balance indicator
[d] : Gain indicator
[e] : Shutter speed indicator
[f] : Aperture value
DISPLAY
DATA CODE