Warning indicators and messages, P.113, Self-diagnosis display/warning indicators – Sony DCR-SR40 User Manual

Page 113

Advertising
background image

113

Tr

o

ubl
es
hoo

ting

If indicators appear on the LCD screen, check
the following.
You can solve some of the symptoms by
yourself. If your problem persists even after
you have tried a couple of times, contact your
Sony dealer or local authorized Sony service
facility.

C:(or E:) ss:ss (Self-diagnosis
display)

C:04:ss

• The battery pack is not an

“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p.120).

• Connect the DC plug of the AC Adaptor

to the DC IN jack of the Handycam
Station or your camcorder securely
(p.17, 18).

C:13:ss / C:32:ss

• Remove the power source. Reconnect it

and operate your camcorder again.

E:20:ss / E:31:ss / E:40:ss /
E:61:
ss / E:62:ss / E:91:ss /
E:94:
ss

• A malfunction that you cannot service

has occurred. Contact your Sony dealer
or local authorized Sony service facility.
Inform them of the 5-digit code, which
starts from “E”.

100-0001 (Warning indicator
pertaining to files)

Slow flashing

• The file is damaged.
• The file is unreadable.

(Warning on the hard disk of the

camcorder)*

Fast flashing

• An error may have occurred with the hard

disk drive in your camcorder.

(Warning on the hard disk of the

camcorder)*

Fast flashing

• The hard disk of the camcorder is fully

recorded.

• An error may have occurred with the hard

disk drive in your camcorder.

E

(Battery level warning)

Slow flashing

• The battery pack is nearly used up.
• Depending on the operating

environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.

(High temperature warning)

Slow flashing

• The temperature of your camcorder is

getting higher. Turn off your camcorder
and leave it for a while in a cool place.

Fast flashing

*

• The temperature of your camcorder is

extremely high. Turn off your camcorder
and leave it for a while in a cool place.

(Low temperature warning)

Fast flashing

*

• The temperature of your camcorder is

extremely low. Make the camcorder
warm.

(Warning indicator pertaining to the

external flash)*

Slow flashing

• Still charging.

Fast flashing

• There is something wrong with the flash.

Warning indicators and messages

Self-diagnosis display/Warning
indicators

C:04:00

Advertising
This manual is related to the following products: