Een (p.62), Ing (p.62), Display – Sony DCR-SR40 User Manual

Page 62

Advertising
background image

62

CAMERA DATA

3 SteadyShot off
4 Exposure
5 White balance
6 Gain
7 Shutter speed
8 Aperture value
9 Exposure value

appears for an image recorded using a flash

(optional).

• The data code is displayed on the TV screen, if

you connect your camcorder to a TV.

• The indicator toggles through the following

sequences as you press DATA CODE on the
Remote Commander: DATE/TIME

t

CAMERA DATA

t OFF (no indication) (DCR-

SR60/SR80).

• Depending on the hard disk condition of the

camcorder, bars [--:--:--] appear.

• The setting returns to [OFF] after you remove the

power source for more than five minutes.

You can select the number of thumbnails that
appear on the VISUAL INDEX screen.
Thumbnail

1 Glossary (p.124)

B

ZOOM LINK

Change the number of thumbnails (6 or 12)
with the zoom lever on your camcorder.*

6IMAGES

Displays thumbnails of 6 images.

12IMAGES

Displays thumbnails of 12 images.

* You can operate with the zoom buttons on the

LCD frame or on the Remote Commander
(DCR-SR60/SR80).

B

AUTO

Displays the remaining hard disk free space
for about eight seconds as described below.
– When your camcorder recognizes the free

hard disk space, with the POWER switch
is set to

(Movie)

– When you press DISP/BATT INFO to

switch the screen display from off to on,
with the POWER switch is set to

(Movie)

– When you start recording from the line

input (DCR-SR60/SR80)

ON

Always displays the remaining hard disk
free space indicator.

• When the available free space on the hard disk of

the camcorder becomes less than five minutes for
movie recording, the remaining free space will be
displayed all the time.

The default setting is [ON] so that you can
use the supplied Remote Commander (p.41).

• Set to [OFF] to prevent your camcorder from

responding to a command sent by other device’s
remote control.

• The setting returns to [ON] after you remove the

power source for more than five minutes.

The camera recording lamp will not light up
during recording when you set this to [OFF].
(The default setting is [ON].)

DISPLAY

AWB

60min

00:00:00

Movie

60min

10/10

Still image

REMAINING

REMOTE CTRL (Remote control)
(DCR-SR60/SR80)

REC LAMP (Recording lamp)
(DCR-SR60/SR80)

Advertising
This manual is related to the following products: