AEG LAVAMAT L 1045 E - Manual (Page 25)

25
How to wash
At the end of the programme
The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The END
light comes on in the pro-
gramme progress display.
If the light (OVERDOSAGE) comes on it indicates that too much
detergent has been used. At the next wash carefully follow the deter-
gent manufacturer’s instructions. Measure out detergent according to
amount, type, degree of soil of fabrics and water hardness.
This light could come on also when the drain filter is blocked.
If the RINSE HOLD
option has been selected, the water must be
emptied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by turning the selector dial to
O and then to DRAIN “C” and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.
Turn the selector dial to
O.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
132996650.qxd 26/09/01 14.30 Pagina 25 (Nero/Process Black pellicola)