Sony VGX-XL3 - Manual (Page 27)

24 VGX-XL3 Digital Living System
• Antenna (air) for Digital Television System (ATSC Signal Standard).
• Standard antenna (air) system (NTSC Signal Standard).
Connecting to standard cable access (CATV)
Note to CATV System Installer : Follow the 820-93 section of the National
Electric Code which provides guidelines for proper grounding and in
particular, specify that the coaxial cable shield is connected to the grounding
of the building, as close to the point of cable entry as practical.
Option 1
1 Connect one end of the TV coaxial cable (not included) to your cable service
access.
2 Connect the other end of the TV coaxial cable to the VHF/UHF port on the
back panel of your computer.
Option 2
1 Connect one end of a TV coaxial cable to your cable service access. Connect
the other end to the single-connection side of a splitter adapter.
2 Connect a second TV coaxial cable (not included) to the double-connection
side of the splitter adapter. Connect the other end to the VHF/UHF port on the
back panel of your computer.
3 Connect a third TV coaxial cable (not included) to the double-connection side
of the splitter adapter. Connect the other end to the VHF/UHF port on the
back of your TV monitor or display.