Wireless keyboard, Setting up the keyboard, Insert the batteries – Sony VGX-XL3 User Manual
Page 8: Activate wireless keyboard communication, Wireless keyboard setting up the keyboard
VGX-XL3 Digital Living System
5
Wireless Keyboard
Setting up the Keyboard
Insert the Batteries
On the back of the Keyboard, remove the battery compartment cover and
insert four (4) Alkaline AA batteries (supplied) in the battery compartment.
Replace the battery compartment cover.
Activate Wireless Keyboard Communication
Before using the keyboard, you must activate communications between the
DLS computer and the wireless keyboard w/integrated pointing device.
To activate wireless keyboard communications
Make sure there are no obstructions between the VGX-XL3 computer and the
wireless keyboard when activating communications.
1
On the front of the keyboard, slide the Power switch to
On
.
2
On the back of the keyboard, slide the Point Device switch to
On
.
3
On the back of the keyboard, and the front panel of the VGX-XL3 computer,
press the connect buttons simultaneously and hold for a few seconds.
4
Test the keyboard and the pointing device to make sure both are functioning
properly.