Sony SHAKE5 - Manual (Page 11)

model name [SHAKE-5]
[4-462-816-12(1)] GB
11 GB
filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF
02)\4462816121_GB\05CON.fm] masterpage:Right
Gett
ing St
ar
te
d
C AUDIO IN jacks
Use an audio cord (not supplied) to
connect to the audio output jacks of the
following equipment. The sound is output
through this system.
– TV/DVD/SAT L/R
Connect to a TV or an audio/video
equipment.
– PC/GAME L/R
Connect to a computer or gaming
device.
D Power
Plug the power cord into a wall socket.
The demonstration appears in the display
panel. Press "/1 to turn on the system and
the demonstration automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).
Insert the two supplied R6 (size AA)
batteries, matching the polarities shown
below.
Notes
• Do not mix an old battery with a new one or
mix different types of batteries.
• If you do not use the remote control for a long
period of time, remove the batteries to avoid
damage from battery leakage and corrosion.
You can attach the supplied bottom panel
to the bottom of the main unit to raise the
front panel and to ease the operations.
1
Insert the hooks of the bottom
panel to the catcher holes on the
bottom of the main unit.
2
Insert the pins of the bottom
panel to the catcher holes. Then,
push the bottom panel until it
locks into the main unit.
Inserting batteries
Attaching the bottom panel
Hook
Catcher
hole
Main unit
Bottom
panel
Catcher hole
Pin