Setting the bluetooth audio codecs – Sony SHAKE5 User Manual

Page 23

Advertising
background image

model name [SHAKE-5]

[4-462-816-12(1)] GB

23

GB

filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF
02)\4462816121_GB\06BAS.fm]

masterpage:Right

Blu

e

tooth

x For an NFC-compatible

smartphone

Touch the smartphone to the N-Mark on
the system to establish the Bluetooth
connection.
Start playback of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.

To disconnect the Bluetooth device

x For a Bluetooth device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.

x For an NFC-compatible

smartphone

Touch the smartphone to the N-Mark on
the system again.

Use the buttons on the unit to perform this
operation.

1

Press BLUETOOTH to select
Bluetooth
function.

“BLUETOOTH” appears in the
display panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.

2

Hold down OPTIONS and
PHASER for about 3 seconds.

“PAIR HISTORY” and “CLEAR”
appear in the display panel and all the
pairing information is erased.

Setting the Bluetooth
audio codecs

You can select the Bluetooth audio codecs
when the connected Bluetooth device
supports Advanced Audio Coding
(AAC).

1

Press OPTIONS on the unit.

2

Press

/

repeatedly to select

“BT AAC”, then press

.

3

Press

/

repeatedly to select

“BT AAC ON” or “BT AAC OFF”.

• BT AAC ON: Advanced Audio

Coding (AAC) is selected if the
Bluetooth device supports AAC.

• BT AAC OFF: Sub Band Codec

(SBC) is selected.

Notes

• You can enjoy high quality sound if the AAC

is selected. In case you cannot listen to AAC
sound from your device, select “BT AAC
OFF”.

• If you change this setting while the system is

connected to a Bluetooth device, the
Bluetooth device will be disconnected. To
connect to the Bluetooth device, perform the
Bluetooth connection again.

Erasing all the pairing
registration information

Advertising