Sony PCV-LX800 - Manual (Page 33)

Configuring Your System 19
To enable or disable the CMOS Clear or onboard VGA Interrupt, perform
the following steps:
1
Remove the system cover (see “Removing the System Cover” on
page 22 ).
2
Set the switches according to the table show in the diagram (see also
“Configuration Switches” on page 59).
!
Do not change any configuration switch unless directed by an authorized Sony
technician.
O N 1 2
KY0059.VSD
Clear password 1
O N
1 2
On
2 Enable
Normal
Off
Disable
Configuration switches (SW1)
Switch # Name
CMOS
AGP_INT