Sony PCV-LX800 - Manual (Page 45)

Removing, Installing, and Replacing Components 31
Removing the Power Supply
You must remove the power supply to replace the CMOS battery.
1
Remove the screw that secures the power supply to the chassis (see 1
in diagram).
2
Press down on the plastic lever at the bottom of the power supply
(see 2 in diagram) to release the power supply.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
MER001.VSD
1
2